NSA 240

CF BOOT CONFIG
1-3 & 4-6PROMJET_CS#FLASH0_CS#
1-3 & 5-6PROMJET_CS#FLASK1_CS#
3-4 & 5-6FLASH0_CS#FLASH1_CS#
3-5 & 4-6FLASK1_CS#FLASK0_CS#

Default jumpers, resistor on: 3-4 & 5-6 (FLASH0_CS#|FLASH1_CS#)
Remove jumper 5-6 to get prompt of u-boot.

jumper to get prompt
[... .i2c_write ...]
## No elf image at address 0x0e000000
Octeon#
U-boot 5.0.2.12 (Production build) (Build time: Nov 20 2008 - 16:16:28)

OCTEON SNWL_GOMBE-4 CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM:  256 MB
Flash: 32 MB ( Bank 0: 16 MB Bank 1: 16 MB )
.i2c_write: octeon 3 byte data write error


Uncompressed 0x181d88 bytes
ELF file is 32 bit
Allocating memory for ELF: Base addr, 0x2000000, size: 0xe000000
Loading .text @ 0x82008000 (1389536 bytes)
Loading .data @ 0x8215c000 (178688 bytes)
Loading .cvmx_shared @ 0x82187a00 (416 bytes)
Clearing .bss @ 0x82187c00 (1194416 bytes)
## Loading ELF image with entry point: 0x82008000 ...
Bootloader: Done loading app on coremask: 0x1
Enabling Octeon big bar support